Minobond HF is a rapid setting mortar for the repair and reconstruction of concrete and reinforced concrete, the anchoring of metal elements in concrete, and for filling space between concrete and steel elements.
This product is a one-component material, ready for use after mixing with the batched water. It is a dry cement-based mortar with high quality aggregate up to 0.5 mm and modified with additives and polymers.
Advantages
Excellent bond to concrete substrates
Rapid setting
Non-combustible
Product Features
Its exceptional flow properties make it ideal for the reinstatement of small, structural sections of concrete as well as for many restricted locations
Its self-compacting nature eliminates honeycombing and displaces air without vibration
Pre-bagged to overcome site-batched variations – only the site addition of clean water is required
Is compressive strength after 28 days of curing exceeds the 60 MPa
Product Options
Packed in 25 kg valve sack - 40 bags per pallet
Related Products
Minobond
This is a dry cement-based mortar with high quality aggregate up to 0.5 mm and modified with additives and polymers that is ready for use after mixing with the batched water.
The material is ideal for the reinstatement of small, structural sections of concrete accessible for hand or trowel applied mortars. The thixothropic nature of Minobond allows to use it in wall and roof application.
It is supplied as a ready to use blend of dry powders which requires only the addition of clean water to produce a highly compacted, rapid setting mortar which is easy to apply.
The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of shrinkage cracking.
Fibre reinforced, this product offers strengths over 55 MPa and can be used in conventional, dry-process shotcrete equipment. It is ideal where immediate structural strength is required.
Tekcrete™ Fast M was developed in response to customer demand for a shotcrete with effectively immediate strength on application. The product can be used with or without steel or polymer mesh, although the mesh will provide additional tensile and flexural strength. Binding broken strata together for better structural integrity, Tekcrete™ Fast M can be used anywhere in a mine where conventional shotcrete is used and as with any coating or sealant.