Capcem™ Plug a mortar formulated for the rapid sealing of water leaks from fissures and cracks, where slower setting conventional mortars would be washed away and where fast setting resin mortars will not bond on wet surfaces. It is suitable for most rock types, concrete and brick.
It is supplied as a dry powder needing only the addition of water to produce an ultra-rapid set plugging mortar. This mortar sets rapidly to form a hard, durable mortar with an ultimate compressive strength of 10 MPa when mixed as advised.
Advantages
Rapid set stops water leaks quickly
Permanent sealing effect
Only water needs to be added
Features
Cement-based product
Non-toxic, non-combustible and non-corrosive mortar
Mixed in the proportion 3 parts Capcem™ Plug powder by volume to 1 part water
Due to the rapid set, only small quantities should be mixed each time
The mortar cures best in humid conditions where dry-out can be avoided
Product Options
Capcem™ Plug 1 - 1 minute, Pack Size: 10 kg
Capcem™ Plug 3 - 3 minutes, Pack Size: 10 kg
Related Products
Rock Bolts
We provide you with solutions for both active and passive methods of rock support wherever you are.
Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.
Our offering can help you with:
Roof and ground control
Slope stabilisation
Rock fall
Permanent and temporary rock bolting
Spiling
Converging/yielding areas
Bolts alone may not be enough.
Many applications require additional components to ensure the desired results.
We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.
Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.
It is a two-part pumpable cement grout for anchoring of rock bolts in rock that decomposes in contact with water.
The powder and liquid are mixed together using a power-driven mixer/pump to yield a pumpable thixotropic grout. A minimum of 3 boxes per mix should be used. Part packs must not be used.