Capcem™ PLG is a pumpable cement grout for use in the installation of mechanical long-anchors from 3 to 15 metres in length.
This product is a single component cementitious powder that is mixed with water. It is supplied in 25 kg lined, woven polypropylene bags. The mixed grout is intended for placement through a suitable grout pump.
Advantages
Working life of 4 hours, at 25°C
No shrinkage or bleed water
No grout run-out
High pH inhibits corrosion
Features
Cement based product with no resins or solvents
Water temperature should be between 20°C and 30°C
Pumped into the drilled hole before or after installation of the anchor, to give full column filling
Pumpable up to 15 metres
Compressive strength of 10 MPa, 48 hours after mixing with water
Product Options
Packaged in 25 kg bags - 40 bags per pallet. Each pallet is shrink wrapped to protect the product against damage.
Related Products
Rock Bolts
We provide you with solutions for both active and passive methods of rock support wherever you are.
Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.
Our offering can help you with:
Roof and ground control
Slope stabilisation
Rock fall
Permanent and temporary rock bolting
Spiling
Converging/yielding areas
Bolts alone may not be enough.
Many applications require additional components to ensure the desired results.
We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.
Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.