Ekopur J is a one component polyurethane adhesive for bonding porous materials such as wood, styrofoam, and polyurethane foam with metal sheets. It can also be used as bonding material for thermal insulation during door production.
Ekopur J is a flexible product that allows for easy adjustments to its application parameters in order to match customer's specific requirements.
This moisture - cured polyurethane adhesive does not contain any volatile organic solvents.
Applied manually or mechanically
Contains no volatile organic solvents
The adhesive may be applied by hand or with use of mechanical applicator
An additional sprayed layer of water and higher temperature accelerate the curing process
The bonded elements should be pressed down with a press machine
Possesses the Hygienic Assessment Certificate (PZH)
The adhesive is packed into 20 or 30 litre barrels or canisters .
Ekoflex products are a two-component foams, obtained after mixing component A (aqueous solution of phenol-formaldehyde resin) and component B (aqueous solution of organic and inorganic acids) in a volume ratio of 4:1. The foam property allows the products to be used under various geological and mining conditions.
Various products are available in this category with varying foaming factors and reaction speeds.
The final material is obtained after mixing component A (mixture of polyols and additives) and component B (polymeric MDI based) in a given volume ratio. Application parameters of the system can be adjusted to customer specific requirements.
The final product is obtained after mixing component A (a mixture of polyols and flame retardants) and component B (polymeric MDI isocyanate with additives) in a volume ratio of 1:1. The adhesive property allows use of it under various geological conditions. Application parameters of the adhesives can be adjusted to customer specific requirements.